/*
 * Mountlist for manually mounting the sample ramdisk driver.
 *
 * F0: and F1: are set up for the V1.3 fast file system (FFS).
 * S2: and S3: are setup for the old file system (OFS).
 *
 * After mounting, the drives must be formatted.  Be sure to
 * use the FFS flag when formatting the Fast File System
 * ramdrives:
 *
 *      ;make sure "ramdev.device" is in DEVS:
 *
 *      mount f0: from mydev-mountlist
 *      format drive f0: name "Zippy" FFS
 */
F0:        Device = ramdev.device
           Unit   = 0
           LowCyl = 0 ; HighCyl = 14
           Surfaces  = 1
           Buffers = 1
           BlocksPerTrack = 10
           Flags  = 0
           Reserved = 2
           GlobVec = -1
           BufMemType = 0
           DosType = 0x444F5301
           StackSize = 4000
           FileSystem = l:fastfilesystem
#
F1:        Device = ramdev.device
           Unit   = 1
           LowCyl = 0 ; HighCyl = 14
           Surfaces  = 1
           Buffers = 1
           BlocksPerTrack = 10
           Flags  = 0
           Reserved = 2
           GlobVec = -1
           BufMemType = 0
           DosType = 0x444F5301
           StackSize = 4000
           FileSystem = l:fastfilesystem
#
S2:        Device = ramdev.device
           Unit   = 2
           Flags  = 0
           Surfaces  = 1
           BlocksPerTrack = 10
           Reserved = 1
           Interleave = 0
           LowCyl = 0  ;  HighCyl = 14
           Buffers = 1
           BufMemType = 0
#
S3:        Device = ramdev.device
           Unit   = 3
           Flags  = 0
           Surfaces  = 1
           BlocksPerTrack = 10
           Reserved = 1
           Interleave = 0
           LowCyl = 0  ;  HighCyl = 14
           Buffers = 1
           BufMemType = 0
#