NAME
       WM_HANDLEINPUT -- IDCMP input handling method

   SYNOPSIS
       result = DoMethod( winobj, WM_HANDLEINPUT, &code );

   FUNCTION
       This method is used to handle the IDCMP input of a window. Call
       this method when the signal bit of the window's UserPort is
       set. This method will return when it encounters a message that
       requires notifying your application or when the message port no
       longer contains messages for the window.

       The return value is two-part. The upper word describes the
       class of the event the value represents, and the lower word is
       a modifier that describes the event.

       Defined class return codes are:

       WMHI_IGNORE            Ignore this event
       WMHI_LASTMSG        No more messages
       WMHI_CLOSEWINDOW    close gadget hit
       WMHI_GADGETUP        gadget hit.
       WMHI_INACTIVE        window went inactive.
       WMHI_ACTIVE            window was activated.
       WMHI_NEWSIZE        window was resized.
       WMHI_MENUPICK        A menu item was selected.
       WMHI_MENUHELP        Help was pressed in a menu.
       WMHI_GADGETHELP        A gadget sends a help message.
       WMHI_ICONIFY        window should be iconified.
       WMHI_UNICONIFY        window was deiconified.
       WMHI_RAWKEY            Raw key code
       WMHI_VANILLAKEY        Vanilla key code
       WMHI_CHANGEWINDOW    window moved (or depth arranged)

       The value of the lower word is defined for WMHI_GADGETUP and
       WMHI_GADGETHELP as the ID of the gadget, and for WMHI_MENUPICK
       and WMHI_MENUHELP as the menu code. WMHI_GAGDETHELP uses the
       special values 0 and WMHI_GADGETMASK as messages "pointer not
       over your window" and "pointer over your window but not over a
       gadget".

       WMHI_RAWKEY returns the raw key ID of the key being
       pressed (to get the qualifiers also, you have to use the IDCMP
       hook), and WMHI_VANILLAKEY returns the ASCII value of the key.
       WMHI_VANILLAKEY is only returned when you set IDCMP_VANILLAKEY.
       Windowclass itself does not need vanilla key IDCMP.

       WMHI_NEWSIZE returns some extra information in the low word:
       if WMF_ZOOMED is set, the window is now in zoomed state. If
       WMF_ZIPWINDOW is set, this resize was caused by either a
       click of the zoom gadget or a call to zipwindow().

       WMHI_CHANGEWINDOW is returned when the window is moved. For
       resizing of the window, listen to WMHI_NEWSIZE. By setting
       WA_NotifyDepth, this event will also be returned for depth
       arranging. The lower word contains CWCODE_DEPTH in this case.

       WMHI_CLASSMASK masks the lower word of the result code out,
       while WMHI_GADGETMASK and WMHI_MENUMASK mask out the high word,
       leaving only the ID part of the result value.

       A generic application side of WM_HANDLEINPUT looks like this:

       GetAttr( WINDOW_SigMask, winobj, &wsig );

       mask = Wait(wsig);    /* maybe other signals */

       if (mask & wsig)
           while ((result = DoMethod( winobj, WM_HANDLEINPUT, &code ))
                   != WMHI_LASTMSG)
               switch (result & WMHI_CLASSMASK)
               {
               case WMHI_CLOSEWINDOW:
                   close = TRUE;
                   break;

               case WMHI_GADGETUP:
                   switch (result & WMHI_GADGETMASK)
                   {
                   /* handle the gadgets here */
                   }

               /* handle whatever other events you want here */
               }

       if (close)
           DisposeObject( winobj ); /* destroy the window */

       If you have set up the window to use a shared message port, you
       can simply call this method on each of the windows:

       if (mask & wsig)
       {
           WmHandleInputWin1();
           WmHandleInputWin2();
           WmHandleInputWin3();
       }

   INPUTS
       code -- A pointer to a WORD that should be set to contain the
               Code value from the intuimessage.

   RESULTS
       Windowclass will automatically respond with an appropriate
       action to many input events. When it does not know what to do
       with an event, it will return with a value as descibed above.