IFND    RESOURCES_BATTMEMBITSAMIGA_I
RESOURCES_BATTMEMBITSAMIGA_I    SET     1
**
**      $Filename: resources/battmembitsamiga.i $
**      $Release: 2.04 Includes, V37.4 $
**      $Revision: 1.2 $
**      $Date: 90/05/29 $
**
**      BattMem Amiga specific bit definitions.
**
**      (C) Copyright 1989-1999 Amiga, Inc.
**              All Rights Reserved
**


*
* Amiga specific bits in the battery-backedup ram.
*
*       Bits 0 to 31, inclusive
*

*
* AMIGA_AMNESIA
*
*               The battery-backedup memory has had a memory loss.
*               This bit is used as a flag that the user should be
*               notified that all battery-backed bit have been
*               reset and that some attention is required. Zero
*               indicates that a memory loss has occured.
*

BATTMEM_AMIGA_AMNESIA_ADDR      EQU     0
BATTMEM_AMIGA_AMNESIA_LEN       EQU     1


*
* SCSI_TIMEOUT
*
*               adjusts the timeout value for SCSI device selection.  A
*               value of 0 will produce short timeouts (128 ms) while a
*               value of 1 produces long timeouts (2 sec).  This is used
*               for SeaCrate drives (and some Maxtors apparently) that
*               don`t respond to selection until they are fully spun up
*               and intialised.
*

BATTMEM_SCSI_TIMEOUT_ADDR       EQU     1
BATTMEM_SCSI_TIMEOUT_LEN        EQU     1


*
* SCSI_LUNS
*
*               Determines if the controller attempts to access logical
*               units above 0 at any given SCSI address.  This prevents
*               problems with drives that respond to ALL LUN addresses
*               (instead of only 0 like they should).  Default value is
*               0 meaning don't support LUNs.
*

BATTMEM_SCSI_LUNS_ADDR          EQU     2
BATTMEM_SCSI_LUNS_LEN           EQU     1


        ENDC    ; RESOURCES_BATTMEMBITSAMIGA_I