![[Contents]](../images/toc_d.gif)
![[Index]](../images/index_d.gif)
![[Help]](../images/help_d.gif)
![[Retrace]](../images/retrace_d.gif)
![[Browse <]](../images/prev.gif)
![[Browse >]](../images/next.gif)
#ifndef SANA2_SANA2DEVICE_H
#define SANA2_SANA2DEVICE_H 1
/*
** $Filename: devices/sana2.h $
** $Revision: 1.10 $
** $Date: 92/01/10 15:10:05 $
**
** Structure definitions for SANA-II devices.
**
** (C) Copyright 1991-1999 Amiga, Inc.
** All Rights Reserved
*/
#ifndef EXEC_TYPES_H
#include <exec/types.h>
#endif
#ifndef EXEC_PORTS_H
#include <exec/ports.h>
#endif
#ifndef EXEC_IO_H
#include <exec/io.h>
#endif
#ifndef EXEC_ERRORS_H
#include <exec/errors.h>
#endif
#ifndef DEVICES_TIMER_H
#include <devices/timer.h>
#endif
#ifndef UTILITY_TAGITEM_H
#include <utility/tagitem.h>
#endif
#define SANA2_MAX_ADDR_BITS (128)
#define SANA2_MAX_ADDR_BYTES ((SANA2_MAX_ADDR_BITS+7)/8)
struct IOSana2Req
{
struct IORequest ios2_Req;
ULONG ios2_WireError; /* wire type specific error */
ULONG ios2_PacketType; /* packet type */
UBYTE ios2_SrcAddr[SANA2_MAX_ADDR_BYTES]; /* source addr */
UBYTE ios2_DstAddr[SANA2_MAX_ADDR_BYTES]; /* dest address */
ULONG ios2_DataLength; /* length of packet data */
VOID *ios2_Data; /* packet data */
VOID *ios2_StatData; /* statistics data pointer */
VOID *ios2_BufferManagement; /* see SANA-II OpenDevice adoc */
};
/*
** defines for the ios2_Flags field
*/
#define SANA2IOB_RAW (7) /* raw packet IO requested */
#define SANA2IOF_RAW (1<<SANA2IOB_RAW)
#define SANA2IOB_BCAST (6) /* broadcast packet (received) */
#define SANA2IOF_BCAST (1<<SANA2IOB_BCAST)
#define SANA2IOB_MCAST (5) /* multicast packet (received) */
#define SANA2IOF_MCAST (1<<SANA2IOB_MCAST)
#define SANA2IOB_QUICK (IOB_QUICK) /* quick IO requested (0) */
#define SANA2IOF_QUICK (IOF_QUICK)
/*
** defines for OpenDevice() flags
*/
#define SANA2OPB_MINE (0) /* exclusive access requested */
#define SANA2OPF_MINE (1<<SANA2OPB_MINE)
#define SANA2OPB_PROM (1) /* promiscuous mode requested */
#define SANA2OPF_PROM (1<<SANA2OPB_PROM)
/*
** defines for OpenDevice() tags
*/
#define S2_Dummy (TAG_USER + 0xB0000)
#define S2_CopyToBuff (S2_Dummy + 1)
#define S2_CopyFromBuff (S2_Dummy + 2)
struct Sana2DeviceQuery
{
/*
** Standard information
*/
ULONG SizeAvailable; /* bytes available */
ULONG SizeSupplied; /* bytes supplied */
ULONG DevQueryFormat; /* this is type 0 */
ULONG DeviceLevel; /* this document is level 0 */
/*
** Common information
*/
UWORD AddrFieldSize; /* address size in bits */
ULONG MTU; /* maximum packet data size */
ULONG BPS; /* line rate (bits/sec) */
ULONG HardwareType; /* what the wire is */
/*
** Format specific information
*/
};
/*
** defined Hardware types
**
** If your hardware type isn't listed below contact CATS to get a new
** type number added for your hardware.
*/
#define S2WireType_Ethernet 1
#define S2WireType_IEEE802 6
#define S2WireType_Arcnet 7
#define S2WireType_LocalTalk 11
#define S2WireType_AmokNet 200
#define S2WireType_PPP 253
#define S2WireType_SLIP 254
#define S2WireType_CSLIP 255
struct Sana2PacketTypeStats
{
ULONG PacketsSent; /* transmitted count */
ULONG PacketsReceived; /* received count */
ULONG BytesSent; /* bytes transmitted count */
ULONG BytesReceived; /* bytes received count */
ULONG PacketsDropped; /* packets dropped count */
};
struct Sana2SpecialStatRecord
{
ULONG Type; /* statistic identifier */
ULONG Count; /* the statistic */
char *String; /* statistic name */
};
struct Sana2SpecialStatHeader
{
ULONG RecordCountMax; /* room available */
ULONG RecordCountSupplied; /* number supplied */
/* struct Sana2SpecialStatRecord[RecordCountMax]; */
};
struct Sana2DeviceStats
{
ULONG PacketsReceived; /* received count */
ULONG PacketsSent; /* transmitted count */
ULONG BadData; /* bad packets received */
ULONG Overruns; /* hardware miss count */
ULONG UnknownTypesReceived; /* orphan count */
ULONG Reconfigurations; /* network reconfigurations */
struct timeval LastStart; /* time of last online */
};
/*
** Device Commands
*/
#define S2_START (CMD_NONSTD)
#define S2_DEVICEQUERY (S2_START+ 0)
#define S2_GETSTATIONADDRESS (S2_START+ 1)
#define S2_CONFIGINTERFACE (S2_START+ 2)
#define S2_ADDMULTICASTADDRESS (S2_START+ 5)
#define S2_DELMULTICASTADDRESS (S2_START+ 6)
#define S2_MULTICAST (S2_START+ 7)
#define S2_BROADCAST (S2_START+ 8)
#define S2_TRACKTYPE (S2_START+ 9)
#define S2_UNTRACKTYPE (S2_START+10)
#define S2_GETTYPESTATS (S2_START+11)
#define S2_GETSPECIALSTATS (S2_START+12)
#define S2_GETGLOBALSTATS (S2_START+13)
#define S2_ONEVENT (S2_START+14)
#define S2_READORPHAN (S2_START+15)
#define S2_ONLINE (S2_START+16)
#define S2_OFFLINE (S2_START+17)
#define S2_END (S2_START+18)
/*
** defined errors for ios2_Error (see also <exec/errors.h>)
*/
#define S2ERR_NO_ERROR 0 /* peachy-keen */
#define S2ERR_NO_RESOURCES 1 /* resource allocation failure */
#define S2ERR_BAD_ARGUMENT 3 /* garbage somewhere */
#define S2ERR_BAD_STATE 4 /* inappropriate state */
#define S2ERR_BAD_ADDRESS 5 /* who? */
#define S2ERR_MTU_EXCEEDED 6 /* too much to chew */
#define S2ERR_NOT_SUPPORTED 8 /* hardware can't support cmd */
#define S2ERR_SOFTWARE 9 /* software error detected */
#define S2ERR_OUTOFSERVICE 10 /* driver is OFFLINE */
/*
** From <exec/errors.h>
**
** IOERR_OPENFAIL (-1) * device/unit failed to open *
** IOERR_ABORTED (-2) * request terminated early [after AbortIO()] *
** IOERR_NOCMD (-3) * command not supported by device *
** IOERR_BADLENGTH (-4) * not a valid length (usually IO_LENGTH) *
** IOERR_BADADDRESS (-5) * invalid address (misaligned or bad range) *
** IOERR_UNITBUSY (-6) * device opens ok, but requested unit is busy *
** IOERR_SELFTEST (-7) * hardware failed self-test *
*/
/*
** defined errors for ios2_WireError
*/
#define S2WERR_GENERIC_ERROR 0 /* no specific info available */
#define S2WERR_NOT_CONFIGURED 1 /* unit not configured */
#define S2WERR_UNIT_ONLINE 2 /* unit is currently online */
#define S2WERR_UNIT_OFFLINE 3 /* unit is currently offline */
#define S2WERR_ALREADY_TRACKED 4 /* protocol already tracked */
#define S2WERR_NOT_TRACKED 5 /* protocol not tracked */
#define S2WERR_BUFF_ERROR 6 /* buff mgt func returned error */
#define S2WERR_SRC_ADDRESS 7 /* source address problem */
#define S2WERR_DST_ADDRESS 8 /* destination address problem */
#define S2WERR_BAD_BROADCAST 9 /* broadcast address problem */
#define S2WERR_BAD_MULTICAST 10 /* multicast address problem */
#define S2WERR_MULTICAST_FULL 11 /* multicast address list full */
#define S2WERR_BAD_EVENT 12 /* unsupported event class */
#define S2WERR_BAD_STATDATA 13 /* statdata failed sanity check */
#define S2WERR_IS_CONFIGURED 15 /* attempt to config twice */
#define S2WERR_NULL_POINTER 16 /* null pointer detected */
/*
** defined events
*/
#define S2EVENT_ERROR (1L<<0) /* error catch all */
#define S2EVENT_TX (1L<<1) /* transmitter error catch all */
#define S2EVENT_RX (1L<<2) /* receiver error catch all */
#define S2EVENT_ONLINE (1L<<3) /* unit is in service */
#define S2EVENT_OFFLINE (1L<<4) /* unit is not in service */
#define S2EVENT_BUFF (1L<<5) /* buff mgt function error */
#define S2EVENT_HARDWARE (1L<<6) /* hardware error catch all */
#define S2EVENT_SOFTWARE (1L<<7) /* software error catch all */
#endif /* SANA2_SANA2DEVICE_H */