[Contents] [Index] [Help] [Retrace] [Browse <] [Browse >]


    NAME
        amigaguide.datatype -- data type for AmigaGuide databases.

    FUNCTION
        The amigaguide.datatype is the DataTypes class for AmigaGuide
        databases.

    METHODS
        OM_NEW -- Create a new AmigaGuide object.

        OM_GET -- Obtain the value of an attribute.

        OM_SET -- Set the values of multiple attributes.

        OM_UPDATE -- Update the values of multiple attributes.

        OM_DISPOSE -- Dispose of an AmigaGuide object.

        GM_LAYOUT -- Layout the object and notify the application of the
            title and size.

        GM_HITTEST -- Determine if the object has been hit with the
            mouse.

        GM_GOACTIVE -- Tell the object to go active.

        GM_HANDLEINPUT -- Handle input.

        GM_RENDER -- cause the amigaguide database to render.

        DTM_GOTO -- cause the amigaguide database to load and display
            document.

        DTM_TRIGGER -- Trigger an event.

            STM_COMMAND - Invoke an AmigaGuide command.

            STM_CONTENTS - Display the table of contents.

            STM_INDEX - Display the index.

            STM_HELP - Display the help file.

            STM_RETRACE - Retrace.

            STM_BROWSE_PREV - Go to the previous sequential document.

            STM_BROWSE_NEXT - Go to the next sequential document.

        DTM_PROCLAYOUT -- Layout (remap) the AmigaGuide database on the
            application's process.

        DTM_FRAMEBOX -- Obtain the display environment that the
            AmigaGuide database requires.

        DTM_SELECT -- Select an area in the AmigaGuide database.

        DTM_CLEARSELECTED -- Deselect the selected area of the
            AmigaGuide database.

        DTM_COPY -- Copy the selected area of the text to the clipboard
            as FTXT.  If no area is selected, then the entire text
            is copied.

        DTM_PRINT -- Print the selected area of the text.  If no area
            is selected, then the entire text is printed.

        DTM_WRITE -- write the selected area of the text to a file.
            If no area is selected, then the entire text is saved.

    TAGS
        DTA_TriggerMethods -- list of the trigger methods supported.

            Applicability is (G).

        DTA_Methods -- list of the methods supported.

            Applicability is (G).

        DTA_TextAttr (struct textattr *) -- text attribute to use for
            the AmigaGuide database.

            Applicability is (ISG).

        DTA_Name (STRPTR) -- Name of the AmigaGuide database.

            Applicability is (I).

        DTA_Handle (BPTR) -- File handle for the AmigaGuide database.

            Applicability is (I).

        DTA_NodeName (STRPTR) -- Document to display.

            Applicability is (I).

        TDTA_WordDelim (STRPTR) -- Characters used to deliminate words.

            Applicability is (IS). Defaults to "t *-,<>()[];"".

        AGA_HelpGroup (ULONG) -- Help group that the AmigaGuide object
            belongs in.

            Applicability is (I).

        AGA_Secure (BOOL) -- This tag allows you control whether
            AmigaGuide will execute the commands "ONOPEN", "ONCLOSE",
            "LINK RX", "LINK RXS" and "LINK SYSTEM". These commands
            present a potential security hole if, for example,
            AmigaGuide documents are displayed in an e-mail reader
            program. To disabled them, set the AGA_Secure tag to
            TRUE; in this case AmigaGuide will still recognize the
            commands but will not execute them.

            Applicability is (ISG). Defaults to FALSE. (V41)

    COMMANDS
        Commands must start in the very first column of a line, and
        can be the only thing on the line.  If a line begins with an
        @ sign, then it is interpreted as a command.

        The following commands can be used in the global section
        of a database.

          @$VER: <AmigaDOS version string>
          Specify the version of the database.  This command
          must always be in upper-case.

          @(C) <copyright>
          Specify the copyright notice for the database.

          @AUTHOR <name>
          Specify the author of the database.

          @DATABASE <name>
          Must be the very first line of an AmigaGuide document.

          @DNODE <name>
          Indicates the start of a dynamic node.  the amigaguide system
          uses the callback hooks to obtain the document from a document
          provider.  This is obsolete, do not use.

          @FONT <name> <size>
          Specify the font to use for the database.

          @HEIGHT <chars>
          How high, in characters, the largest document is.

          @HELP <name/node>
          Specify the name of the help node, which will be accessed
          by the Help button.  Can be a node in an external database.

          @INDEX <name/node>
          Specify the name of the index node, which will be accessed
          by the Index button.  Can be a node in an external database.

          @MACRO <name> <commands>
          This is used to construct a macro.  A macro can be used the
          same way as an attribute command, and can only consist of
          other attribute commands or macros.  The macro list is
          searched before the attribute command list is searched.  This
          is new for V40.

              @macro icom "@{i}$1 @{ui}"

              ...

              This is an @{icom "example"} of macro.

          @MASTER <path>
          Complete path of the source document used to define this
          AmigaGuide database.

          @NODE <name> <title>
          Indicate the start of a node (page/article/section). The first
          node, or main node, must be named MAIN.  MAIN must be the master
          table of contents for the database.

          @ONCLOSE <rxcommand>
          This is used to specify an ARexx macro file to execute when
          the database is closed.  The return value of the script has no
          effect on the database.  New for V40.

          @ONOPEN <rxcommand>
          This is used to specify an ARexx macro file to execute when
          the database is opened.  If the script returns an error, then
          the database will not be opened.  New for V40.

          @REM <remark>
          @REMARK <remark>
          This is used to place remarks in the database.  These remarks
          are not displayed to the user.

          @SMARTWRAP
          This is used to indicate that the text of the database is to
          wordwrapped using a more intelligent algorithm than @WORDWRAP.
          A paragraph doesn't need to be restricted to one physical
          line, but paragraphs must be separated by two line feeds.
          New for V40.

          @TAB <num>
          Number of spaces in a tab.  Defaults to 8.  New for V40.

          @WIDTH <chars>
          How wide, in characters, the largest document is.

          @WORDWRAP
          Turn on wordwrapping for the whole database.  A paragraph must
          be restrained to one physical line.

        The following commands can be used within nodes of a database.

          \
          A backslash is the escape character.  A backslash in front of
          the @ sign is used to escape it. The backslash has no effect
          as an escape character inside commands such as @ONOPEN or
          @{".." LINK ..}; in cases like these it is treated as a
          regular character.
          Please note that AmigaGuide V35 does not treat the backslash
          character as an escape character.

          @ENDNODE <name>
          Indicate the end of a node.  must start at the beginning of a
          line.

          @FONT <name> <size>
          Specify the font to use for the node.

          @HELP <name/node>
          Specify the name of the help node, which will be accessed
          by the Help button.  Can be a node in an external database.

          @INDEX <name/node>
          Specify the name of the index node, which will be accessed
          by the Index button.  Can be a node in an external database.

          @KEYWORDS <keywords>
          Keywords of the node.  someday when searching is
          reimplemented, there will be a keyword search.

          @NEXT <node name>
          Node to display when the user selects "Browse >"

          @ONCLOSE <rxcommand>
          This is used to specify an ARexx macro file to execute when
          the node is closed.  The return value of the script has no
          effect on the node.  new for v40.

          @ONOPEN <rxcommand>
          This is used to specify an ARexx macro file to execute when
          the node is opened.  If the script returns an error, then
          the node will not be opened.  New for V40.

          @PREV <node name>
          Node to display when the user selects "< Browse"

          @SMARTWRAP
          This is used to indicate that the text of the node is to
          wordwrapped using a more intelligent algorithm than @WORDWRAP.
          A paragraph doesn't need to be restricted to one physical
          line, but paragraphs must be separated by two line feeds.
          New for V40.

          @TAB <num>
          Number of spaces in a tab.  Defaults to 8.  New for V40.

          @TITLE <title>
          Title to display in the title bar of the window during the
          display of this node.  must start at the beginning of a line.

          @TOC <node name>
          Name of the node that contains the table of contents for this
          node.  defaults to main.  this is the node that is displayed
          when the user presses the "Contents" button.

          @WORDWRAP
          Turn on wordwrapping for the node.  a paragraph must
          be restrained to one physical line.

          @{<label> <command>}
          Indicate a textual link point.  Can be anywhere in a line.
          Starting with 3.0, AmigaGuide can can link to graphics,
          sounds, animations and other DataTypes.

    ATTRIBUTES
        Following is a list of attributes that can be applied to the
        text of a node.

          @{AMIGAGUIDE}
          Displays the word AmigaGuide in bold followed by the ® symbol.
          New for V40.

          @{APEN}
          Use to change the foreground color to a specific pen number.
          New for V40.

          @{B}
          Turn bold on.

          @{BG <color>}
          Used to change the background text color.  Color can be:

            Text
            Shine
            Shadow
            Fill
            FillText
            Background
            Highlight

          @{BODY}
          Indicate that the following text is the body of the document.
          Word wrap will be turned back on if it is the default.  New
          for V40.

          @{BPEN}
          Use to change the background color to a specific pen number.
          New for V40.

          @{CLEARTABS}
          Restore the default tab stops.  New for V40.

          @{CODE}
          Indicate that the following text is not to be word-wrapped.
          New for V40.

          @{FG <color>}
          Used to change the foreground color.  The same colors can be
          used as in the FG command.

          @{I}
          Turn italic on.

          @{JCENTER}
          Turn on centering.  New for V40.

          @{JLEFT}
          Turn on left justification.  New for V40.

          @{JRIGHT}
          Turn on right justification.  New for V40.

          @{LINDENT}
          Set the number of spaces to indent the body of a paragraph.
          New for V40.

          @{LINE}
          Force a line feed without starting a new paragraph.  New for V40.

          @{PAR}
          Used to indicate the end of a paragraph.  This is the same as
          two sequential LF's in the source file.  New for V40.

          @{PARD}
          Restore the default settings for a paragraph.  Text pen to 1,
          background to 0, normal font, and no indentation.  New for V40.

          @{PARI}
          Set the number of spaces to indent the first line of a
          paragraph relative to the normal paragraph indentation.  The
          value may be a negative number.  New for V40.

          @{PLAIN}
          Used to turn off all @{B}, @{I}, and @{U} commands.  New for
          V40.

          @{SETTABS <n> ... <n>}
          This is used to establish tab stops.  New for V40.

          @{TAB}
          The same as character 9 in the source file.  New for V40.

          @{U}
          Turn underline on.

          @{UB}
          Turn bold off.

          @{UI}
          Turn italic off.

          @{UU}
          Turn underline off.

    AREXX COMMANDS
        AmigaGuide supports the following ARexx commands.

          BEEP
          displaybeep().

          CLOSE
          Close the current database.

          GETNODECOUNT
          Returns the number of nodes in the database using the RESULT
          variable.  New for V40.

          LINK
          Go to the named node.

          NEXT
          Go to the next physical node in the database.  Same as
          pressing the "Browse >" button.  New for V40.

          PREVIOUS
          Go to the previous physical node in the database.  Same as
          pressing the "Browse <" button.  New for V40.

          PRINT
          Print the current node.  doesn't return until complete.  new for
          V40.

          QUIT
          Close the current database.

          RETRACE
          Go to the previous node in the database.  Same as pressing the
          "Retrace" button.  New for V40.