[Contents] [Index] [Help] [Retrace] [browse <] [Browse >]


NAME
    AllocMem -- allocate memory given certain requirements

SYNOPSIS
    memoryBlock = AllocMem(byteSize, attributes)
    D0                     D0        D1

    void *AllocMem(ULONG, ULONG);

FUNCTION
    This is the memory allocator to be used by system code and
    applications.  It provides a means of specifying that the allocation
    should be made in a memory area accessible to the chips, or
    accessible to shared system code.

    Memory is allocated based on requirements and options.  Any
    "requirement" must be met by a memory allocation, any "option" will
    be applied to the block regardless.  AllocMem will try all memory
    spaces until one is found with the proper requirements and room for
    the memory request.

INPUTS
    byteSize - the size of the desired block in bytes.  (The operating
            system will automatically round this number to a multiple of
            the system memory chunk size)

    attributes -
        requirements

            If no flags are set, the system will return the best
            available memory block.  For expanded systems, the fast
            memory pool is searched first.

            MEMF_CHIP:      If the requested memory will be used by
                            the Amiga custom chips, this flag *must*
                            be set.

                            Only certain parts of memory are reachable
                            by the special chip sets' DMA circuitry.
                            Chip DMA includes screen memory, images that
                            are blitted, audio data, copper lists, sprites
                            and Pre-V36 trackdisk.device buffers.


            MEMF_FAST:      This is non-chip memory.  If no flag is set
                            MEMF_FAST is taken as the default.

                            DO NOT SPECIFY MEMF_FAST unless you know
                            exactly what you are doing!  If MEMF_FAST is
                            set, AllocMem() will fail on machines that
                            only have chip memory!  This flag may not
                            be set when MEMF_CHIP is set.


            MEMF_PUBLIC:    Memory that must not be mapped, swapped,
                            or otherwise made non-addressable. ALL
                            MEMORY THAT IS REFERENCED VIA INTERRUPTS
                            AND/OR BY OTHER TASKS MUST BE EITHER PUBLIC
                            OR LOCKED INTO MEMORY! This includes both
                            code and data.


            MEMF_LOCAL:     This is memory that will not go away
                            after the CPU RESET instruction.  Normally,
                            autoconfig memory boards become unavailable
                            after RESET while motherboard memory
                            may still be available.  This memory type
                            is now automatically set in V36.  Pre-V36
                            systems may not have this memory type
                            and AllocMem() will then fail.


            MEMF_24BITDMA:  This is memory that is within the address
                            range of 24-bit DMA devices.  (Zorro-II)
                            This is required if you run a Zorro-II
                            DMA device on a machine that has memory
                            beyond the 24-bit addressing limit of
                            Zorro-II.  This memory type
                            is now automatically set in V36.  Pre-V36
                            systems may not have this memory type
                            and AllocMem() will then fail.


        options

            MEMF_CLEAR:     The memory will be initialized to all
                            zeros.


            MEMF_REVERSE:   This allocates memory from the top of
                            the memory pool.  It searches the pools
                            in the same order, such that FAST memory
                            will be found first.  However, the
                            memory will be allocated from the highest
                            address available in the pool.  This
                            option is new as of V36.


RESULT
    memoryBlock - a pointer to the newly allocated memory block.
            If there are no free memory regions large enough to satisfy
            the request, zero will be returned.  The pointer must be
            checked for zero before the memory block may be used!

WARNING
    The result of any memory allocation MUST be checked, and a viable
    error handling path taken.  ANY allocation may fail if memory has
    been filled.

EXAMPLES
    AllocMem(64,0L)         - Allocate the best available memory
    AllocMem(25,MEMF_CLEAR) - Allocate the best available memory, and
                              clear it before returning.
    AllocMem(128,MEMF_CHIP) - Allocate chip memory
    AllocMem(128,MEMF_CHIP|MEMF_CLEAR) - Allocate cleared chip memory
    AllocMem(821,MEMF_CHIP|MEMF_PUBLIC|MEMF_CLEAR) - Allocate cleared,
            public, chip memory.

NOTE
    If the free list is corrupt, the system will panic with alert
    AN_MemCorrupt, $01000005.

    This function may not be called from interrupts.

    A DOS process will have its pr_Result2 field set to
    ERROR_NO_FREE_STORE if the memory allocation fails.

SEE ALSO
    freemem