IFND    RESOURCES_BATTMEMSHARED_I
RESOURCES_BATTMEMBITSSHARED_I   SET     1
**
**      $Filename: resources/battmembitsshared.i $
**      $Release: 2.04 Includes, V37.4 $
**      $Revision: 1.2 $
**      $Date: 90/05/29 $
**
**      BattMem shared specific bit definitions.
**
**      (C) Copyright 1989-1999 Amiga, Inc.
**              All Rights Reserved
**


*
* Shared bits in the battery-backedup ram.
*
*       Bits 64 and above
*

*
* SHARED_AMNESIA
*
*               The battery-backedup memory has had a memory loss.
*               This bit is used as a flag that the user should be
*               notified that all battery-backed bit have been
*               reset and that some attention is required. Zero
*               indicates that a memory loss has occured.
*

BATTMEM_SHARED_AMNESIA_ADDR     EQU     64
BATTMEM_SHARED_AMNESIA_LEN      EQU     1


*
* SCSI_HOST_ID
*
*               a 3 bit field (0-7) that is stored in complemented form
*               (this is so that default value of 0 really means 7)
*               It's used to set the A3000 controllers SCSI ID (on reset)
*

BATTMEM_SCSI_HOST_ID_ADDR       EQU     65
BATTMEM_SCSI_HOST_ID_LEN        EQU     3


*
* SCSI_SYNC_XFER
*
*               determines if the driver should initiate synchronous
*               transfer requests or leave it to the drive to send the
*               first request.  This supports drives that crash or
*               otherwise get confused when presented with a sync xfer
*               message.  Default=0=sync xfer not initiated.
*

BATTMEM_SCSI_SYNC_XFER_ADDR     EQU     68
BATTMEM_SCSI_SYNC_XFER_LEN      EQU     1


        ENDC    ; RESOURCES_BATTMEMSHARED_I