#ifndef RESOURCES_BATTMEMBITSAMIGA_H
#define RESOURCES_BATTMEMBITSAMIGA_H 1
/*
**      $Filename: resources/battmembitsamiga.h $
**      $Release: 2.04 Includes, V37.4 $
**      $Revision: 1.1 $
**      $Date: 90/05/25 $
**
**      BattMem Amiga specific bit definitions.
**
**      (C) Copyright 1989-1999 Amiga, Inc.
**              All Rights Reserved
*/


/*
 * Amiga specific bits in the battery-backedup ram.
 *
 *      Bits 0 to 31, inclusive
 */

/*
 * AMIGA_AMNESIA
 *
 *              The battery-backedup memory has had a memory loss.
 *              This bit is used as a flag that the user should be
 *              notified that all battery-backed bit have been
 *              reset and that some attention is required. Zero
 *              indicates that a memory loss has occured.
 */

#define BATTMEM_AMIGA_AMNESIA_ADDR     0
#define BATTMEM_AMIGA_AMNESIA_LEN       1


/*
 * SCSI_TIMEOUT
 *
 *              adjusts the timeout value for SCSI device selection.  A
 *              value of 0 will produce short timeouts (128 ms) while a
 *              value of 1 produces long timeouts (2 sec).  This is used
 *              for SeaCrate drives (and some Maxtors apparently) that
 *              don`t respond to selection until they are fully spun up
 *              and intialised.
 */

#define BATTMEM_SCSI_TIMEOUT_ADDR      1
#define BATTMEM_SCSI_TIMEOUT_LEN        1


/*
 * SCSI_LUNS
 *
 *              Determines if the controller attempts to access logical
 *              units above 0 at any given SCSI address.  This prevents
 *              problems with drives that respond to ALL LUN addresses
 *              (instead of only 0 like they should).  Default value is
 *              0 meaning don't support LUNs.
 */

#define BATTMEM_SCSI_LUNS_ADDR         2
#define BATTMEM_SCSI_LUNS_LEN           1


#endif /* RESOURCES_BATTMEMBITSAMIGA_H */